The operation steps for the rechargeable remote control of the fog cannon machine mainly include pre-startup preparation, startup operation, remote control function operation, and shutdown operation. To facilitate understanding, the editor from Zhengtong Fan has sorted out detailed operation steps and precautions.
Power Connection: Ensure the main electrical control cabinet power and control power are correctly connected, distinguishing between the neutral wire and live wire.
Reset Emergency Stop Button: Reset the “Emergency Stop” buttons on both the remote control and control panel before startup to ensure normal system operation.
Voltage Check: Observe if the voltmeter, main power indicator, and control power indicator are on to confirm power supply to each circuit. Do not start the water pump without water supply.
Power and Control: Turn on the air switch in the control cabinet and connect the fan power. Check the fan phase sequence; swap live wires if necessary for proper operation.
Start Button: Press the self-locking start button on the electrical box panel, then press the green start button on the remote control to activate the fog cannon machine.
Basic Operations: Manually control up/down/left/right movement, fan, and water pump via the remote control. The fan and water pump buttons have self-locking: press once to turn on, press again to turn off.
Automatic Spraying: Activate the automatic function on the electrical box panel for continuous spraying if needed.
Rotation Angle Adjustment: Adjust the left-right rotation angle via the remote control. The air duct will stop automatically when the baffle touches the limit switch.
Turn Off Water Pump and Fan: First, press the water pump and fan buttons on the remote control to turn them off.
Reset the Fog Cannon Machine: Return the machine to its original position, then press the stop button on the remote control.
Cut Off Power: Finally, press the start/shutdown button on the control cabinet panel to turn off the power.
Always check if the emergency stop button is reset before any operation to avoid startup failure due to the emergency stop state.
Press the red stop button on the remote control to immediately halt the machine during operation if needed.
Monitor the machine’s operation during use; stop and inspect immediately if abnormal noises, odors, or smoke are detected.
In summary, the above steps enable effective daily startup, operation, and shutdown of the fog cannon machine. Following the correct remote control procedures prevents equipment damage or safety accidents caused by improper operation.
Contact With Us
If you have any questions please fell free to contact with us.