The automated operation of a remote fog cannon machine ensures that the equipment can accurately and quickly respond to control commands, fulfilling tasks such as dust suppression and environmental improvement. A correct operation process is crucial for the stable operation of the fog cannon machine during use. Below, the editor from Zhengtong Fog Cannon will help you understand the detailed automated operation process of the remote fog cannon machine.
Self-Inspection and Diagnosis: When started, the remote fog cannon machine conducts a system self-inspection to diagnose the normal operation of various functions, including the detection of key components such as sensors, water pumps, and nozzles.
Communication Connection: Establish a communication link with the control center to ensure interference-free command transmission, which can be achieved through wireless networks, wired networks, or other communication methods.
Spraying Mode Selection: Choose different spraying modes according to specific needs, such as fixed spraying, cyclic spraying, or random spraying.
Working Parameter Configuration: Set parameters such as spraying angle, distance, and flow rate, which will be adjusted based on specific tasks and environmental conditions.
Task Receiving: The control center sends specific task instructions to the fog cannon machine based on environmental monitoring data.
Task Confirmation: The fog cannon machine confirms the received instructions and makes preparations for spraying.
Water Pump Activation: Turn on the water pump to pressurize water or dust suppression liquid and deliver it to the nozzles.
Spraying Operation: According to the preset working parameters, the nozzles start spraying water mist to carry out environmental improvement operations.
Environmental Change Monitoring: Real-time monitor environmental changes through on-board sensors, such as indicators like dust concentration and temperature.
Feedback Adjustment: Based on the monitoring data, adjust the spraying parameters in real time to optimize the spraying effect.
Operation Termination: After the task is completed, stop spraying and turn off the water pump.
Status Reporting: Send a task completion report and the current status of the equipment to the control center.
Fault Diagnosis: Conduct regular system fault diagnosis, and promptly issue alarms and handle problems if any are found.
Maintenance: Perform routine maintenance on the equipment in accordance with the maintenance manual, replace worn parts, and ensure the long-term stable operation of the equipment.
Abnormal Handling: In case of emergencies, such as water supply interruption or power failure, the fog cannon machine can quickly respond and switch to a safe state.
Emergency Shutdown: When necessary, operators can remotely shut down the fog cannon machine urgently to ensure safety.
Every step of the process is crucial. A user-friendly operation interface is provided to allow operators to easily grasp the equipment operation status and perform manual intervention.
Every step in the automated operation process of the remote fog cannon machine is vital. During use, it not only provides a user-friendly operation interface for operators to easily monitor the equipment’s running status and conduct manual intervention but also ensures the efficiency and reliability of the fog cannon machine.
Contact With Us
If you have any questions please fell free to contact with us.